Whether you are installing or re-programming a SEWOSY stand-alone keypad and you’re unsure where to start — whether it’s wiring, adding a new user, configuring the relay timeout, or changing an existing code — here’s everything you need to know to set up your stand-alone keypad quickly and effectively.
Understand the wiring of your stand-alone keypad
When installing a SEWOSY stand-alone keypad, it is crucial to correctly identify the output wires for proper connection.
- Red and black: 12-24 V AC/DC power supply — essential for the keypad’s operation.
- Pink and white: Common and Normally Open (NO) of relay 1. Use for motorised gates or locks requiring current-emission.
- Pink and light-green: Common and Normally Closed (NC) of relay 1. Use for locks needing current-interruption.
- Green and orange: Push-button input of relay 1, normally open (NO).
How to add a new user to your stand-alone keypad
To register a new user on your SEWOSY stand-alone keypad:
- Enter your master code (default: 1234 1234).
- Enter *001 to indicate you wish to add a new user.
- Assign a user number (001 to 999).
- Enter the new code, or present your badge if supported.
- Finish programming by pressing the # key twice.
The new user code is now active immediately.
How to program the relay timeout on your stand-alone keypad
You can define a timeout for relay 1 — i.e., how long it remains active before automatic switch-off.
- Enter your master code (default: 1234 1234).
- Enter *1 to access the relay-timeout function.
- Enter the number of seconds (e.g., 05 for five seconds).
- Finish by pressing # twice.
How to delete an old user code
If a user no longer needs access, you can remove their code:
- Enter your master code (default: 1234 1234 if unchanged).
- Specify the user number to delete (001-999).
- Press the * key twice to confirm deletion.
- Exit programming mode by pressing # twice.
Note: To delete all users at once: enter your master code, then * 8 88 # #.
How to change the master code of the stand-alone keypad
If you wish to modify the master code:
- Enter your current master code (default: 1234 1234).
- Enter *3 to access the master-code change function.
- Enter the new code twice to confirm.
- Press # # to validate.
Attention: The master code does not open the door — it’s only for configuring the keypad.
How to reset your SEWOSY stand-alone keypad
If the master code is lost, you can reset the keypad to factory settings:
- Switch off the power to the keypad.
- Press and hold the # key.
- Re-apply power while holding the # key for 3 seconds.
The master code is reset to “1234 1234”.
SEWOSY K1000 and KR1000 series — reliable stand-alone access solutions
SEWOSY offers several stand-alone keypad models, including the K1000 and KR1000:
- The K1000 stand-alone keypad is ideal for fast and secure access via PIN only.
- The KR1000 (and variants) combine a stand-alone keypad with a proximity reader (badge + code / dual-factor authentication).
These models are weather-resistant, feature back-lit keys and intuitive programming for adding, modifying or deleting codes with ease.
Explore our full stand-alone access product range with proximity reader options for flexible access control.
Need further assistance? Contact our technical support team!