Follow us

Push button abs NO+NC with KEY symbol screw terminal

Push button abs NO+NC with KEY symbol screw terminal

with red and green LEDs

Push button abs NO+NC with KEY symbol screw terminal

Thanks to its large support surface and its sober and clear design, this push button is easy to use. It can be connected to a code keypad and then benefits from the programmed delay of the keypad, which avoids having to keep the stainless button pressed to cross the access. A handy feature when you have your arms loaded!

The LED lights in green to indicate that the door is unlocked, and turns red again when the lock is reset.

LEDs driving by access control

Provided that a time delay is built into the keypad! In this case, the opening of the access is operated by simply pressing the finger on the stainless steel surface of the ABS push button, but it is not necessary to hold the button down. For example, if the keypad time delay is set to 30 seconds, this allows time to leave the building safely and hands free!

Voltage and mounting type at choice

The push button works with 12V DC or 24V DC depending on installations. It can be surface-mounted ou mortised in an electric pot of 60 mm. In brief, it’s an adaptable access control device which can be stand-alone or driven by a proximity reader, or also by a magnetic contact.

Push button with changeover contact

The C/NO/NC contact embedded in the 12/24V DC push button triggers the opening and closing of the door. It’s breaking power is 30V DC-0,5 Amp.

Sewosy offers a range of keypads and proximity readers compatible with the 12/24V DC psuhs buttons with LEDs driving.

Technical details

Sortie 1: 30V DC-0,5 A
-10 + 55 °C
12V - 24V DC
max. 13 mA

Subscribe to our newsletter

and download our last newsletters.