Follow us

Power supply on DIN rail 230V AC / 12V DC / 30W - 2,5A

Power supply on DIN rail 230V AC / 12V DC / 30W - 2,5A

ADD1230
Power supply on DIN rail 230V AC / 12V DC / 30W - 2,5A
Description

Designed by Sewosy, this switching mode power supply is installed on a DIN rail and occupies five modules.

It transforms an input voltage between 220V and 240V AC into 12V DC at the output. Better than that: the nominal voltage of the DIN rail power supply is adjustable by +/- 15% via its potentiometer.

Quick and easy connection

Thanks to their +/- doubled outputs, these modular power supplies allow installers to save time during installation. The conductor cross section is 2.5 mm2 maximum. In addition, the user outputs are placed at the bottom of the 12V DC power supply, which is more convenient than when they are at the top.

Power supplies 2,5 Amps – 30 W

Electric strikes, electromagnetic locks and handles, access control: many locking devices can be powered with these power supplies created by Sewosy. Their maximum intensity is 2.5 Amps (30 Watts).

Overvoltage and short-circuit protection

A PTC electronic fuse is integrated in the DIN rail power supply without battery backup. It resets automatically after the defect has been restored.

Included in pre-wired YAKA kits

The DIN rail power supply is part of the YAKA access control kits. These all-in-one kits are pre-wired 3m and preprogrammed! They are very fast to connect via their "color-to-color" connectors, and exist in several models depending on the electrical or electromagnetic locking product required for installation.

More about the YAKA kits:

Technical details

-10 +60° C
20
220V - 240V AC
12V DC
2,5 A

Subscribe to our newsletter

and download our last newsletters.