Follow us

Dropbolt time delay fail safe 2 contacts 12-24V DC

Dropbolt time delay fail safe 2 contacts 12-24V DC

narrow design

Dropbolt time delay fail safe 2 contacts 12-24V DC

Adaptable to a single or double action door, this electric dropbolt fits easily into narrow profiles, can be mounted at the horizontal at the top of the door panel or frame, as well as at the vertical, in the door frame or leaf.

The locking time delay built-in the electric dropbolt allows maintaining the unlocking during 0 to 9 seconds, according to what will have been programmed when laying.

Furthermore, the dropbolt to be mortise mounted and come with its counterparty, is equipped with door detection. This device aims to detect the door closing, which will reset the locking.

Also provided with a status sensor, this electric dropbolt sends a report of information to a management organ or a dashboard, to know locking or unlocking access status. Not to mention that this electric dropbolt comprises a position contact, indicating whether the door is open or closed.

The two included contacts, one for the status, the other for position, have a breaking power of 30V DC. By cons, the status sensor cannot exceed 3 Amps, while the position contact stops at 0,25 Amps at more.

The electric dropbolt unblocking is caused by electrical supply failure. That is to say that this device is suitable for safety of persons, who would be able to cross the door if a power outage were happening.

This fail-safe electric dropbolt is also supplied with either 12V or 24V, depending on the facilities. In both cases, the electric dropbolt runs with direct current, thus reducing noise nuisances.

The temperature resistance of this dropbolt for narrow profiles is from -10 ° C to +60 ° C.

Technical details

12V DC
max: 950 mA min: 150 mA
-10 +60 °C
Position: position: 30V DC-0,25 A ** Etat: état: 30V DC-3 A
0 - 9 s

Subscribe to our newsletter

and download our last newsletters.